ABSTRACTS OF ARTICLES OF THE JOURNAL "INFORMATION TECHNOLOGIES".
No. 2. Vol. 29. 2023

DOI: 10.17587/it.29.98-103

M. A. Popov, Senior Software Specialist, M. S. Mashkovskaya, Engineer-Programmer, Bigprinter Digital Innovations, LLC, Odintsovo, Moscow Region, 143002, Russian Federation, A. Yu. Romanov, PhD, Associate Professor,
National Research University Higher School of Economics, Moscow, 109028, Russian Federation

AMD-Xilinx Kria as a Basis for Industrial Equipment Embedded Control System

This article presents a promising embedded control system designed to implement highly complex algorithms in industrial equipment that requires multi-axis positioning and high-speed data transmission. Brief information about the current trends in the development of the user interface of industrial equipment is given, the relevance of control systems with a graphical interface and support for touch displays is noted. The characteristics of the previously developed control system (based on the Zynq-7000 chip) are given, the shortcomings of this system are noted. The use of the Kria SOM module, developed by AMD-Xilinx (USA), is proposed. The key functional blocks of the control system are indicated, the structure of the embedded software is briefly shown. A comparison of two variants of the system — based on Zynq-7000 and Kria SOM — is made. The conclusion about the advantages of using the Kria SOM module (namely: the increase in the speed of mathematical calculations up to 5 times — depending on the task, decrease in the cost of components up to 10 times, simplification of the design of a printed circuit board by reducing the number of layers from 14—16 to 10, significant reduction in time cost of developing a circuit diagram and printed circuit board) is made. The advantages of the Kria SOM as the basis for building a control system with artificial intelligence capabilities are noted.
Keywords: embedded control system, system-on-chip, CNC machine, graphical user interface

P. 98–103

References

1. Smid P. CNC Control Setup for Milling and Turning, New York, Industrial Press, Inc., 2010, 300 p.
2. Anderson G. D. Motion Control for CNC & Robotics, Scotts Valley, CreateSpace Independent Publishing Platform, Inc., 2016, 62 p.
3. America's Machine Tool Builder, available at: https://www.haascnc.com/ru/about/history.html, 2022 (accessed: 17/07/2022).
4. Xilinx Adaptive SOCs, available at: https://www.xilinx.com/products/silicon-devices/soc.html, 2022 (accessed: 17/07/2022).
5. Cyclone V SE SoC FPGA, available at: https://ark.intel.com/content/www/ru/ru/ark/products/series/141581/cyclone-v-se-soc-fpga.html, 2022 (accessed: 17/07/2022).
6. Crockett L. H., Elliot R. A., Enderwitz M. A., Stewart R. W. The Zynq Book. Embedded Processing with the ARM Cortex-A9 on the Xilinx Zynq-7000 All Programmable SoC, Glasgow, Strathclyde Academic Media, 2014, 484 p.
7. Kalachev A. V. Multicore configurable computing platform Zynq-7000, Components and Technologies, 2013, no. 1, pp. 22—33 (in Russian).
8. System-on-Modules — FPGA Boards, available at: https:// www.enclustra.com/en/products/system-on-chip-modules,  2022 (date of access: 17/07/2022).
9.   Product — FPGA, available at: https://www.tulembedded.com/FPGA/, 2022 (accessed: 17/07/2022).
10. Programmable Logic, available at: https://shop.trenz-electronic.de/en/Products/Programmable-Logic, 2022 (accessed:17/07/2022).
11. Tarasov I. E. Xilinx Kria SOM-Based Systems, Components and Technologies, 2021, no. 6, pp. 80—84 (in Russian).
12. Adaptive System-on-Module, available at:https://www. xilinx.com/products/som/kria.html,   2022   (date   of   access: 17/07/2022).
13. Conference FPGA-Systems 2021.1, available at: https:// fpga-systems.ru/conference/2021-1/index.html, 2021 (date of ac­cess: 17/07/2022) (in Russian).
14. Carrier board development for Xilinx Kria, available at: https://youtu.be/sMsTk_iZ-Fc, 2021 (date of access: 17/07/2022) (in Russian).
15. Kria K26 SOM Data Sheet. DS987 (v1.2). AMD-Xilinx, 2022, 51 p.
16. Kria SOM Carrier Card. Design Guide. UG1091 (v1.2). AMD-Xilinx, 2022, 62 p.
17. Kria KV260 Vision AI Starter Kit. User Guide. UG1089 (v1.1). AMD-Xilinx, 2022, 29 p.
18. Zynq UltraScale+. Device Technical Reference Manual. UG1085 (v2.2). AMD-Xilinx, 2022, 1214 p.
19. Getting Started with Kria KV260 Vision AI Starter Kit, available at:, 2021 (date of access: 17/07/2022).
20. 20. PetaLinux Tools, available at: https://www.xilinx.com/products/design-tools/embedded-software/petalinux-sdk.html, 2022 (date of access: 17/07/2022).
21. Pre-Built Applications for Kria System-on-Modules, available   at:   https://www.xilinx.com/products/app-store/kria.html, 2022 (date of access: 17/07/2022).
22. Kria K26 SOM: The Ideal Platform for Vision AI at the Edge. WP529 (v1.0). AMD-Xilinx, 2021, 18 p
    

To the contents