| М. О. Баканов, д-р техн. наук, доц., проф. кафедры информатики и прикладной математики, советник РААСН, Реализация интерактивных AR-решений для управления безопасностью труда на строительных объектах Поступила в редакцию 01.12.2025 В условиях усложнения промышленных и строительных процессов приоритетной задачей становится обеспечение безопасности труда, снижение влияния человеческого фактора и повышение точности выполнения технологических операций. В статье рассматривается внедрение систем дополненной реальности для обеспечения безопасности труда на строительных площадках. Цель исследования — анализ и оценка AR-решений в контексте управления безопасностью труда, а также выявление их потенциала для снижения рисков и повышения эффективности работы персонала. С. 3–14 M. O. Bakanov, Professor of the Department of Computer Science and Applied Mathematics, Advisor to the Russian Academy of Architecture and Construction Sciences, Associate Professor, Implementation of Interactive AR Solutions for Occupational Safety Management at Construction Sites Received on 01.12.2025 As industrial and construction processes become increasingly complex, ensuring occupational safety, reducing the impact of human error, and improving the accuracy of technological operations has become a priority. This article examines the implementation of augmented reality systems for occupational safety at construction sites. The objective of the study is to analyze and evaluate AR solutions in the context of occupational safety management, as well as to identify their potential for reducing risks and improving personnel performance. To achieve this goal, the authors apply a system engineering approach that combines methods of systems analysis, software architecture design, and experimental verification. The methodology is based on the principles of system integrity and involves decomposing the "worker-AR-interface-environment" system into interconnected subsystems. The literature review was conducted using systematic review and content analysis methods across thematic clusters. Three areas of optimization were identified: technical adaptation, context-sensitive adaptation, and preventive control systems. |
|
УДК 331.45
Л. Э. Шварцбург, д-р техн. наук, проф., зав. кафедрой инженерной экологии и безопасности жизнедеятельности, Доминирующие факторы формирования профессиональных рисков при лазерной обработке материалов Поступила в редакцию 10.03.2026 Рассмотрены доминирующие факторы формирования профессиональных рисков при лазерной обработке материалов на примере обработки фанеры на лазерном оборудовании. Особое внимание уделено воздействию химических факторов производственной среды, возникающих в результате термической деструкции органических материалов в зоне лазерного воздействия. В ходе экспериментальных исследований выполнена регистрация концентраций монооксида углерода ( CO ) в зоне лазерной обработки и в рабочей зоне оператора в течение полного технологического цикла. Установлено, что интенсивность формирования газовых загрязнений определяется режимами лазерной обработки, особенностями термической деструкции обрабатываемого материала и эффективностью работы системы местной вытяжной вентиляции. Сделан вывод о том, что газообразные продукты термического разложения материалов являются одним из ключевых факторов формирования профессиональных рисков при использовании лазерных технологий. С. 15–20 L. E. Shvartsburg, Professor, Head of the Department of Engineering Ecology and Life Safety, Dominant Factors in the Formation of Occupational Risks in Laser Processing of Materials Received on 10.03.2026 The article discusses the dominant factors influencing occupational risks in laser processing of materials, using the example of plywood processing with laser equipment. Particular attention is paid to the impact of chemical factors in the production environment resulting from the thermal destruction of organic materials in the laser exposure zone. During experimental studies, the concentrations of carbon monoxide (CO) in the laser processing zone and in the operator's working area were recorded throughout the entire technological cycle. It was established that the intensity of gas contamination formation is determined by the laser processing modes, the characteristics of the thermal destruction of the processed material, and the efficiency of the local exhaust ventilation system. It was concluded that gaseous products of thermal decomposition of materials are one of the key factors in the formation of occupational risks when using laser technologies. |
|
УДК 331.45, 004.413.4 Л. А. Шелыгин, канд. техн. наук, доц., Е. Е. Фомина, д-р техн. наук, проф., Нормативно-правовой контекст интеграции детерминированного и вероятностного подходов в обосновании безопасности промышленных объектов Поступила в редакцию 25.12.2025 Целью исследования является анализ применимости детерминированного и вероятностного подходов к обеспечению безопасности опасных производственных объектов нефтегазового комплекса на основе ключевых федеральных законов. Рассмотрена эволюция методологических подходов к обоснованию безопасности промышленных объектов и зданий в Российской Федерации. Проведен анализ нормативно-правовой базы, выявлено доминирование классического детерминированного подхода в базовых законодательных актах, таких как Федеральный закон № 384-ФЗ "Технический регламент о безопасности зданий и сооружений". Проанализированы положения закона, допускающие и регламентирующие применение вероятностного анализа риска в качестве инструмента для обоснования безопасности в нестандартных и особо ответственных случаях. В качестве примера представлен универсальный подход применения детерминированного и вероятностного методов обеспечения безопасности завода сжиженного природного газа на стадии принятия инвестиционного решения. Сделан вывод о формировании в российском правовом поле комплексного подхода, интегрирующего оба метода, где детерминированные нормы задают обязательный базовый уровень безопасности, а вероятностные методы служат для его оптимизации и углубленного обоснования. С. 21–27 L. A. Shelygin, Associate Professor, E. E. Fomina, Professor, The Regulatory Context of the Integration of Deterministic and Probabilistic Approaches in Justifying the Safety of Industrial Facilities Received on 25.12.2025 The purpose of the study is to analyze the applicability of deterministic and probabilistic approaches to ensuring the safety of hazardous industrial facilities in the oil and gas complex based on key federal laws. The evolution of methodological approaches to substantiating the safety of industrial facilities and buildings in the Russian Federation is considered. The analysis of the regulatory framework has been carried out, and the dominance of the classical deterministic approach in basic legislative acts, such as Federal Law No. 384-FZ "Technical Regulations on the Safety of Buildings and Structures", has been revealed. The provisions of the law that allow and regulate the use of probabilistic risk analysis as a tool for justifying safety in non-standard and particularly critical cases are analyzed. As an example, a universal approach to applying deterministic and probabilistic methods to ensure the safety of a liquefied natural gas plant at the stage of making an investment decision is presented. The conclusion is made about the formation of an integrated approach in the Russian legal field that integrates both methods, where deterministic norms set a mandatory basic level of security, and probabilistic methods serve to optimize it and provide in-depth justification. |
|
УДК 519.87:620.91
И. Ю. Зорина, магистр, Вещественно-математическая модель оценки экологической безопасности полного жизненного цикла генераторных установок на возобновляемых источниках энергии Поступила в редакцию 31.08.2025 Обоснована структура и дан анализ вещественно-математической модели (ВММ) оценки экологической безопасности полного жизненного цикла (ПЖЦ) генераторных установок на возобновляемых источниках энергии (ВИЗ), включающей основные этапы: добыча сырья, производство исходных материалов, изготовление генераторной установки, эксплуатация и утилизация установки. Использовано матричное представление отдельных этапов жизненного цикла. Представлен алгоритм построения и методика анализа оценки экологической безопасности отдельных этапов, а также способ сравнительного анализа экологической безопасности применения генераторных установок на ВИЗ различного типа. С. 28–34 I. Yu. Zorina, Master Degree, A Material-Mathematical Model for Assessing the Environmental Safety of the Full Life Cycle of Renewable Energy Generating Units Received on 31.08.2025 The structure of the material-mathematical model (MMM) for assessing the environmental safety of the full life cycle (FLC) of generator sets on renewable energy sources (RES) is substantiated and an analysis is given. This model includes the main stages: extraction of raw materials, production of initial materials, manufacture of the generator set, operation and disposal of the plant. A matrix representation of individual stages of the life cycle is used. An algorithm for constructing and a methodology for analyzing the environmental safety of individual stages are presented, and a method for comparative analysis of the environmental safety of using generator sets on RES of various types is given. |
|
УДК 331.45
В. А. Казарин, ведущий специалист по охране труда, "Эволюция" методов мониторинга и предотвращения лесных пожаров Поступила в редакцию 07.08.2025 Представлены результаты диагностики причин возникновения лесных пожаров, их современной динамики. Выявлено, что климатические изменения усиливают как интенсивность, так и продолжительность пожароопасных сезонов в различных странах мира. Рассмотрены современные методы мониторинга и предотвращения лесных пожаров. По результатам диагностики методов предотвращения лесных пожаров обоснована необходимость внедрения современных подходов и технологий, основанных на цифровизации, автоматизации и искусственном интеллекте, для снижения масштабов лесных пожаров и их последствий для экосистем и человеческого общества. С. 35–39 V. A. Kazarin, Leading Occupational Safety Specialist, Forest Fire Monitoring and Prevention Evolution Received on 07.08.2025 The results of diagnostics of the causes of forest fires and their current dynamics are presented. It has been revealed that climate change increases both the intensity and the duration of fire-prone seasons in various countries around the world. Modern methods of monitoring and preventing forest fires are considered. Based on the results of diagnostics of methods for preventing forest fires, the need for the implementation of modern approaches and technologies based on digitalization, automation, and artificial intelligence is justified in order to reduce the scale of forest fires and their consequences for ecosystems and human society. |
|
УДК 614.8
А. П. Бызов, канд. техн. наук, доц., Структура методологии анализа техногенного риска для взрывопожароопасных объектов Поступила в редакцию 18.03.2026 Представлены результаты исследования структуры методологии анализа техногенного риска для взрывопожароопасных объектов. Разработан подход к формированию узкоспециализированных терминов в рамках структуры методологии анализа техногенного риска, основанный на базе общепринятых определений. Разработана иерархическая структура методологии анализа техногенного риска для взрывопожароопасных объектов как блок-схема взаимосвязанных элементов, а также описана логика ее формирования. Даны определения и примеры для основных терминов в рамках разработанной структуры. C. 40–48 A. P. Byzov, Associate Professor, Structure of the Methodology for Analyzing Technogenic Risks for Explosive and Fire Hazardous Facilities Received on 18.03.2026 The article presents the results of a study into the structure of a man-made risk analysis methodology for fire and explosion hazardous facilities. An approach to the formation of highly specialized terms within the framework of the man-made risk analysis methodology structure is developed, based on their definitions based on generally accepted ones. A hierarchical structure of the man-made risk analysis methodology for fire and explosion hazardous facilities is developed as a block diagram of interconnected elements, and the logic behind its formation is described. Definitions and examples are provided for the key terms within the developed structure. |
|
УДК 004.9:332 В. А. Прохоров, д-р техн. наук, проф., Л. Д. Варламова, канд. пед. наук, доц., Е. Н. Данилова, ст. преп., Защищенность населенных пунктов на реке Лена при наводнениях Поступила в редакцию 10.12.2025 Одной из актуальных задач в области снижения опасности природных и техногенных чрезвычайных ситуаций является повышение уровня защищенности населенных пунктов. В современных условиях оценка зон затопления стала возможной с использованием геоинформационных систем (ТИС), что позволяет моделировать вероятные последствия наводнений. В рамках данной темы рассмотрено выявление уязвимых мест при затоплениях моделированием затопления населенных пунктов на примере села Октёмцы. Для прогнозирования территории затопления села использованы методы картографического моделирования. На основе анализа географических и гидрологических данных определены наиболее вероятные зоны, требующие противопаводковой защиты, в том числе потенциальные места возведения гидротехнических сооружений. В качестве меры повышения уровня защиты предлагается построить защитное гидротехническое сооружение соответствующего класса, предназначенного для снижения риска затопления. C. 49–55 V. A. Prokhorov, Professor, L. D. Varlamova, Associate Professor, E. N. Danilova, Senior Lecturer, Flood Protection for Settlements on the Lena River Received on 10.12.2025 One of the pressing challenges in reducing the risk of natural and man-made emergencies is increasing the level of protection for populated areas. In modern conditions, assessing flood zones has become possible using geographic information systems (GIS), which allows for modeling the likely consequences of floods. Within this framework,, this article examines the identification of flood vulnerabilities through flood simulations of populated areas, using the village of Oktyomtsy as an example. Cartographic modeling methods were used to predict the flooded area of the village. Based on an analysis of geographic and hydrological data, the most likely zones requiring flood protection were identified, including potential locations for the construction of hydraulic structures. As a measure to enhance the level of protection, it is proposed to construct a protective hydraulic structure of the appropriate class designed to reduce the risk of flooding. Полная версия статьи на eLIBRARY |