АННОТАЦИИ СТАТЕЙ ЖУРНАЛА "БЕЗОПАСНОСТЬ
ЖИЗНЕДЕЯТЕЛЬНОСТИ", №3, 2022

УДК 331.43
А. Ю. Андрюшкин, канд. техн. наук, доц.,
С. А. Мещеряков, асп., Балтийский государственный технический университет "ВОЕНМЕХ" им. Д. Ф. Устинова, Санкт-Петербург,
Е. О. Афанасьев, преп., Санкт-Петербургский университет ГПС МЧС России

Средства коллективной теплозащиты работников с напыленными интегральными теплоизоляционными элементами из газонаполненных пластмасс и отражающими покрытиями

Избыточные тепловыделения ухудшают условия труда работников, поэтому актуально применение эффективных средств коллективной теплозащиты. Значительная эффективность таких средств достигается при одновременной реализации нескольких способов локализации тепловых потоков за счет теплоотражения, теплопоглощения и теплоотвода. Применение изолирующих элементов из напыленных газонаполненных пластмасс и отражающих покрытий обеспечивает высокое конструктивно-технологическое совершенство крупногабаритных теплозащитных конструкций (перегородок, экранов, кожухов), снижает трудоемкость их изготовления. Средства коллективной теплозащиты с напыленными теплоизоляционными элементами из газонаполненных пластмасс и отражающими покрытиями обеспечивают безопасность работников машиностроения и улучшают микроклимат на рабочих местах.
Ключевые слова: средство коллективной теплозащиты, микроклимат, теплозащитная конструкция, газонаполненная пластмасса, отражающее покрытие, напыление

С. 3–10

A. Yu. Andryushkin, Associate Professor, S. A. Meshcheryakov, Postgraduate Student, Baltic State Technical University "VOENMEH", Saint-Petersburg, E. O. Afanasiev, Lecturer, Saint-Petersburg University of State Fire Service of EMERCOM of Russia

Means of Collective Thermal Protection of Workers with Sprayed Integral Thermal Insulation Elements Made of Gas-Filled Plastics and Reflective Coatings

About 50 % of occupational diseases of employees are caused by an unfavorable microclimate in the workplace. The heating microclimate in industrial premises and workshops is often caused by thermal factors. Excessive heat release worsens the working conditions of employees, so it is important to use effective means of collective thermal protection. Significant efficiency of collective thermal protection means is achieved by simultaneous implementation of several methods of localization of heat flows due to heat reflection, heat absorption and heat removal. The use of insulating elements made of sprayed gas-filled plastics and reflective coatings ensures high structural and technological perfection of large-sized heat-protective structures (partitions, screens, casings), reduces the complexity of their manufacture. Means of collective thermal protection with sprayed thermal insulation elements made of gas-filled plastics and reflective coatings ensure the safety of machine-building workers and improve the microclimate in the workplace.
Keywords: means of collective thermal protection, microclimate, thermal protection structure, gas-filled plastic, reflective coating, spraying

К СПИСКУ СТАТЕЙ

УДК 621.332
А. А. Пазуха, асп., e-mail: aapazukha@gmail.com,
К. Б. Кузнецов, д-р техн. наук, проф. кафедры, Уральский государственный университет путей сообщения, Екатеринбург

Обеспечение эквипотенциальных условий при техническом обслуживании, эксплуатации и ремонте контактной сети

Рассмотрена актуальность соблюдения эквипотенциальных условий при производстве работ на контактной сети. Предложена схема реализации эквипотенциальных условий при техническом обслуживании, эксплуатации и ремонте устройств контактной сети, конструкция переносной заземляющей штанги контактной сети. Проведено сравнение характеристик отечественных и зарубежных заземляющих штанг контактной сети, определены направления совершенствования заземляющих штанг контактной сети, обеспечивающие эквипотенциальные условия при техническом обслуживании, эксплуатации и ремонте контактной сети. Обозначена роль и ответственность допускающего в нарядной системе при производстве работ на контактной сети, линиях электропередач, воздушных линиях и связанных с ними устройствах.
Ключевые слова: охрана труда, контактная сеть, электротравматизм, эквипотенциальные условия, допускающий, переносная защитная заземляющая штанга, шунтирующая штанга, токоведущие части контактной сети

C. 11–16

A. A. Pazukha, Postgraduate Student, K. B. Kuznetsov, Professor of Department, Ural State University of Railway Transport, Ekaterinburg

Ensuring Equipotential Conditions during Maintenance, Operation and Repair of the Contact Network

The article discusses the relevance of compliance with equipotential conditions when performing work on the overhead contact network. A scheme for the implementation of equipotential conditions during the maintenance, operation and repair of overhead contact network devices is proposed. The design of a portable grounding rod of the contact network is considered. The characteristics of domestic and foreign grounding rods of the contact network are considered, the directions of improving the grounding rods of the contact network are determined, which will provide equipotential conditions during maintenance, operation and repair technology of the contact network. The role and responsibility of the admitting person in the dressing system during the performance of work on the contact network, power lines, overhead lines and related devices is indicated.
Keywords: labor protection, contact network, electrical injuries, equipotential conditions, admitting person, portable protective grounding rod, shunt rod, live parts of the contact network

К СПИСКУ СТАТЕЙ

УДК 331.45
Е. В. Сотникова, канд. хим. наук, доц., доц. кафедры, Московский авиационный институт (научно-исследовательский университет), Н. Ю. Калпина, канд. техн. наук, доц., доц. кафедры, Московский политехнический университет

Альтернативные подходы к обучению по охране труда на предприятиях

Рассмотрены причины производственного травматизма, наибольшую долю которых составляют слабые навыки действия в сложной ситуации, слабое знание сущности процесса и неумение оценивать информацию о его состоянии (человеческий фактор). Показано, что травматизм связан с недостаточно эффективным процессом обучения по охране труда, которое проводится традиционными методами. Для совершенствования процесса обучения предложен и обоснован новый подход, основанный на использовании интерактивных методов.
Ключевые слова: производственный травматизм, обучение по охране труда, традиционные и интерактивные формы обучения

C. 16–21

E. V. Sotnikova, Associate Professor, Moscow Aviation Institute (National Research University),
N. Yu. Kulpina, Associate Professor, Moscow Polytechnic University

Alternative Approaches to Instruction on Labor Protection for Enterprises

The causes of occupational injuries are considered, the largest share of which are weak skills of action in a difficult situation, poor knowledge of the essence of the process and inability to assess information about its condition (human factor). It is shown that injuries are associated with an insufficiently effective process of oc­cupational safety training, which is carried out by traditional methods. To improve the learning process, an innovative approach based on the use of interactive methods is proposed and justified.
Keywords: occupational injuries, occupational safety training, traditional and interactive forms of training

К СПИСКУ СТАТЕЙ

УДК 331.45
Н. А. Филина, канд. техн. наук, доц. кафедры,
Е. А. Садовина, студент, Поволжский государственный технологический университет, Йошкар-Ола

Анализ проведенной специальной оценки условий труда по районам и учреждениям образования Республики Марий Эл

Рассмотрен мониторинг проведения специальной оценки условий труда на рабочих местах хозяйствующих субъектов Республики Марий Эл в разрезе муниципальных образований (районов), а также учреждений образования. Выявлен процент проведения СОУТ в каждом районе республики, а также представлены учреждения, в которых не проводится специальная оценка условий труда. Идентифицированы вредные производственные факторы, влияющие на работников Поволжского государственного технологического университета. Проведен анализ условий труда преподавателей вуза.
Ключевые слова: специальная оценка условий труда, районы, учреждения образования, класс условий труда, идентификация, вредные производственные факторы

C. 22–26

N. A. Filina, Associate Professor, E. A. Sadovina, Student, Volga State Technological University, Yoshkar-Ola

Analysis of the Special Assessment of Working Conditions in the Regions and Educational Institutions of Mari El Republic

The monitoring of the special assessment of working conditions at the workplaces of economic entities Mari El Republic in the context of municipalities, as well as educational and cultural institutions is considered. The percentage of SOUT in each region of the republic was revealed, and institutions that do not carry out a special assessment of working conditions are presented. Hazardous production factors of employees of the Volga State Technological University have been identified. An analysis of the working conditions of university teachers was carried out.
Keywords: special assessment of working conditions, regions, educational institutions, class of working conditions, identification, harmful production factors

К СПИСКУ СТАТЕЙ

УДК 551.576:629.7(479.24)
Т. Д. Агаев, д-р геогр. наук, проф., Сумгайытский государственный университет, Азербайджан

Исследования трансграничного загрязнения атмосферы Кавказско-Каспийского региона пыльными бурями на основе спутниковых данных

Приведены результаты исследования трансграничного загрязнения атмосферы Кавказско-Каспийского региона пыльными бурями на основе спутниковых данных. Использованы методы статистического анализа, дешифрирования фотоизображений, получаемых с искусственных спутников Земли, а также данные датчика MODIS с оптической толщиной аэрозоля (уровень 2, версия 4). Отмечено, что изучение пыльных бурь имеет большое значение для хозяйственной деятельности. При этом важно определить, насколько далеко может распространяться атмосферная пыль, каковы истинные размеры пылевых выносов, область осаждения и накопления осадочного материала. С экологической точки зрения полученные результаты позволят оценить степень загрязнения атмосферы пылью на больших территориях.
Ключевые слова: трансграничный перенос, пыльные бури, загрязнение атмосферного воздуха, космические фотоизображения, оптическая толщина атмосферы

C. 27–31

T. D. Agayev, Professor, Sumgayit State University, Azerbaijan

Studies of Transboundary Atmospheric Pollution of the Caucasus-Caspian Region by Dust Storms based on Satellite Data

An attempt is made to study transboundary air pollution of the Caucasus-Caspian region by dust storms based on satellite data. The method of statistical analysis, interpretation of photographic images obtained from the satellite, as well as MODIS AOT data (level 2, version 4) were used. The study of dust storms is of great importance for economic activity. At the same time, it is important to know how far the atmospheric dust can spread, what are the true sizes of dust outflows, the area of deposition and accumulation of sedimentary material. From an environmental point of view, the results obtained will make it possible to assess the degree of dust pollution of the atmosphere over large areas.
Keywords: transboundary transport, dust storms, atmospheric air pollution, space photographic images, optical depth of the atmosphere

УДК 504.4.504.001.5
С. Н. Гладких, канд. техн. наук, доц., Новгородский государственный университет имени Ярослава Мудрого, Великий Новгород

Очистка стоков промышленных предприятий от ионов тяжелых металлов

Предложена сорбционная технология очистки производственных стоков, которые содержат ионы тяжелых металлов (ИТМ), природным глинистым минералом каолинитом с активирующими добавками. Рассмотрено влияние тяжелых металлов на организм человека и окружающую среду. Представлены результаты исследований очистки сточных вод от ИТМ с применением фильтра­ции через активированный адсорбент. Определен оптимальный состав активаторов, которые позволяют повысить эксплуатационные свойства сорбента и длительность его использования. При применении предлагаемого метода очистки стоков исключаются их предварительная реагентная обработка и деление на потоки. Результаты теоретических и экспериментальных исследований свидетельствуют об эффективном извлечении ИТМ адсорбентом из стока. Высокое качество очищенной воды активированным адсорбентом дает возможность использовать ее в замкнутых системах водопользования промышленных предприятий.
Ключевые слова: ионы тяжелых металлов, активированный адсорбент, фильтрование, сорбция

С. 32–36  

S. N. Gladkih, Associate Professor, Yaroslav the Wise Novgorod State University, Veliky Novgorod

Industrial Wastewater Treatment from Heavy Metal Ions

The sorption technology of purification of industrial effluents containing heavy metal ions (ITM) with the natural clay mineral kaolinite with activating additives is proposed. The influence of heavy metals on the human body and the environment is considered. The results of studies of wastewater treatment from ITM using filtra­tion through an activated adsorbent are presented. The optimal composition of activators that allow to increase the operational properties of the sorbent and the duration of its use is determined. When using the proposed method of wastewater treatment, their preliminary reagent treatment and division into streams are excluded. The obtained research results indicate the effective extraction of ITM by the adsorbent from the runoff. The high quality of purified water with activated adsorbent makes it possible to use it in closed water use systems of industrial enterprises.
Keywords: heavy metal ions, activated adsorbent, filtration, sorption

К СПИСКУ СТАТЕЙ

УДК 504.73; 631.618
В. Г. Двуреченский, канд. биол. наук, доц.,, Новосибирский государственный архитектурно-строительный университет, доц., Новосибирский государственный педагогический университет, Ф. Е. Козыбаева, д-р биол. наук, проф., гл. науч. сотр., Г. Б. Бейсеева, д-р с.-х. наук, гл. науч. сотр., Казахский научно-исследовательский институт почвоведения и агрохимии им. У У. Успанова, Алматы, Казахстан

Влияние предприятий цветной металлургии на содержание тяжелых металлов в почвах Алтая

Рассмотрены вопросы охраны окружающей среды — важнейшей задачи всего мирового сообщества. Вопросы защиты природы касаются абсолютно всех живых существ планеты. Проблемы, связанные с загрязнением экосистем, актуальны не только для стран, изобилующих природными ресурсами, где налажен полный технологический цикл и высоко развито индустриальное производство, но и для стран, в которых происходит добыча и первичная переработка полезных ископаемых. В результате добычи и переработки любых природных ресурсов, особенно цветных и черных руд, происходит коренное изменение естественных ландшафтов, вплоть до полного уничтожения, прерываются экологические цепочки. При этом на месте естественных экосистем возникают ландшафты с деградированным почвенным покровом. Отмечено, что в почвах таких ландшафтов содержание тяжелых металлов превышает фоновые значения в сотни и тысячи раз. Отражены особенности содержания тяжелых металлов в почвах, подвергшихся воздействию предприятий цветной металлургии на Алтае.
Ключевые слова: деградация естественных экосистем, тяжелые металлы, почвенный покров, экологическая катастрофа

С. 37–43

V. G. Dvurechenskij, Associate Professor, Novosibirsk State Architectural and Construction University, Associate Professor, Novosibirsk State Pedagogical University, F. E. Kozybayeva, Professor, Chief Researcher, G. B. Beiseeva, Chief Researcher, Kazakh Scientific Research Institute of Soil Science and Agrochemistry, Almaty, Kazakhstan

Influence of Non-Ferrous Metallurgy Enterprises on the Content of Heavy Metals in the Soils of Altai

Environmental protection must be considered the most important task of the entire world community. The issues of nature protection concern absolutely all living beings on the planet. The problems associated with the pollution of ecosystems are relevant not only for countries with abundant natural resources, where a full technological cycle and highly developed industrial production are established, but also for countries in which mining and primary processing of minerals take place. As a result of the extraction and processing of any natural resources, especially non-ferrous and ferrous ores, there is a radical change in natural landscapes, up to complete destruction, ecological chains are interrupted, etc. At the same time, landscapes with degraded soil cover appear in place of natural ecosystems. Moreover, in the soils of such landscapes, the content of heavy metals exceeds the background values by hundreds and thousands of times. The article reflects the features of the content of heavy metals in soils affected by non-ferrous metallurgy enterprises in Altai.
Conclusions. 1. The ecological situation is assessed as catastrophic. The soil and ecological status is unsatisfactory. 2. Chemical pollutants accumulate mainly in the humus part of the profile (0...10 (20) cm). 3. In the soil, heavy metals are transformed, especially their water-soluble forms. The main result of the transformation is a decrease in the mobility of heavy metals and their accumulation in the upper soil layer. 4. The middle zone under leguminous grasses (melilot) is most polluted with heavy metals. 5. To return the disturbed ecosystem to a satisfactory state, it is necessary to drastically reduce emissions from the enterprise, urgently re-equip treatment systems with the use of modern technologies for cleaning emissions. 6. After reducing emissions, rehabilitation measures are required, which are reduced to inactivation of excess chemical elements in soils.
Keywords: degradation of natural ecosystems, heavy metals, soil cover, ecological disaster

К СПИСКУ СТАТЕЙ

УДК 614.8
Б. Е. Жакипбаев, доктор PhD, руководитель представительства Международной общественной организации "Международный союз молодых ученых" в Республике Казахстан, A. В. Шныпарков, канд. физ.-мат. наук, доц., ст. преп., B. В. Копытков, канд. техн. наук, доц., начальник кафедры, Гомельский филиал Университета гражданской защиты МЧС Беларуси, А. С. Колесников, канд. техн. наук, проф. кафедры, Южно-Казахстанский государственный университет им. М. Ауэзова, Шымкент

Решения, направленные на локализацию и ликвидацию выбросов химически опасных веществ


Статья посвящена созданию активной защиты для водяного осаждения паров жидкого аммиака на складах его хранения при аварийном выбросе аммиака из сосудов под давлением.
Ключевые слова: жидкий аммиак, выброс, токсичные вещества, авария, газообразный аммиак

С. 44–47  

B. Y. Zhakipbayev, PhD, Head of the Representative Office of the International Public Organization "International Union of Young Scientists" in Kazakhstan Republic, A. V. Shnyparkov, Associate Professor, Senior Lecturer, V. V. Kopytkov, Associate Professor, Chief of Department, Gomel Branch of the University of Civil Protection of the Ministry of Emergency Situations of Belarus, A. S. Kolesnokov, Professor, M. Auezov South Kazakhstan State University, Shymkent

Solutions Aimed at Localizing and Eliminating Emissions of Chemically Hazardous Substances

This article is devoted to the analysis of hazards associated with the possibility of volley emissions of large amounts of ammonia into the atmosphere at chemical and petrochemical enterprises. Guidelines of the Ministry of Emergency Situations of the Republic of Belarus regulating actions aimed at localization and elimination of emergency situations related to the presence of hazardous chemicals, as well as regulatory legal acts in the field of fire safety of technological facilities were considered. As a result, no special studies have been carried out to determine the effectiveness and scope of various stationary equipment operating in automatic mode to control ammonia emissions (straits). Based on the analysis, technical solutions are proposed, consisting in the use of stationary devices that ensure the timely detection and control of the spread of emissions of chemically hazardous substances, which make it possible to exist
Keywords: liquid ammonia, discharge, toxic substances, accident, ammonia gas

К СПИСКУ СТАТЕЙ

УДК 587.41
Р. Р. Закирова, канд. с.-х. наук, доц., Н. Ф. Свинцова, канд. техн. наук, доц., Удмуртский государственный университет, Ижевск

Повышение защиты газопровода от коррозии в ПАО "Газпром Чайковский"

Представлены результаты внутритрубной дефектоскопии с выявлением дефектов продольной ориентации (зоны продольных трещин) коррозионного процесса на участке Ямбург—Елец-2 ПАО "Газпром Чайковский". В ходе проведения коррозионного анализа был получен высокий коррозионный балл. Отмечена целесообразность использования точечно распределенных анодов, устанавливаемых вблизи линий электропередач. От действующих станций катодной защиты по столбам существующей линии электропередач проводится кабель к установленным анодам. К достоинствам данного метода относят минимальные вложения в реконструкцию, использование электрической мощности существующей станции катодной защиты, причем потребляемая станцией мощность снизится за счет уменьшения выходных режимов.
Ключевые слова: коррозионный процесс, дефектоскопия, станция катодной защиты, электро-химзащита, трубопроводы, анодные заземления

С. 48–52

R. R. Zakirova, Associate Professor, N. F. Svintsova, Associate Professor, Udmurt State University, Izhevsk

Improving the Protection of the Gas Pipeline from Corrosion in PAO Gazprom Transgaz Tchaikovsky

Results of flaw detection with detection of defects of longitudinal orientation (zones of longitudinal cracks) are presented. The object of the study is a corrosive process, at the Yamburg—Yelets-2 PAO Gazprom Transgaz Tchaikovsky UAVR 1. During the inspection, 1238 defects were detected. These include longitudinal grooves, dents, abnormal seams, etc. During the corrosion analysis, a high corrosion score was obtained at the Yamburg—Yelets-2. The use of localized distributed anodes near power lines is advisable. A cable to installed anodes is carried out from the active cathodic protection stations along the pillars of the existing power line. The advantages of this method include minimal investment in the reconstruction, use of the electric power of an existing cathodic protection station, wherein the power consumed by the station will be reduced by the reduction of output modes. During the operation of the electrochemical protection, the transitional resistance of the deep anode groundings is reduced, resulting in a significant drop in voltage on the anode.
Keywords: corrosion process, flaw detection, cathode protection station, electrical protection, pipelines, anodic grounding

К СПИСКУ СТАТЕЙ


УДК 331.45
К. Р. Идрисова, канд. техн. наук, доц., Р. Р. Муратова, магистрант, К. О. Назарова, магистрант, Уфимский государственный нефтяной технический университет

Преимущества строительства высокотехнологичных мини-НПЗ в удаленных нефтепромысловых регионах России

Рассмотрены преимущества мини-НПЗ по сравнению с крупными нефтеперерабатывающими заводами с точки зрения промышленной безопасности. Проведен анализ исследуемого вопроса исходя из масштабов эксплуатации мини-НПЗ и крупных нефтеперерабатывающих заводов, уровня автоматизации производственного процесса, схемы взаимодействия объектов в процессе производственного цикла. Дана характеристика функционирования мини-НПЗ, их общие преимущества и основные преимущества в области промышленной безопасности. Приведены данные анализа преимуществ эксплуатации мини-НПЗ: автоматизация производства, современная система управления промышленной безопасностью и охраной труда.
Ключевые слова: промышленная безопасность, пожарная безопасность, охрана труда, экологическая безопасность, автоматизация производства, дистанционное управление, нефтегазовая отрасль, нефтеперерабатывающий завод, мини-НПЗ

С. 53–56

K. R. Idrisova, Associate Professor, R. R. Muratova, Graduate Student,
K. O. Nazarova, Graduate Student, Ufa State Petroleum Technological University

Advantages of Building High-Tech Mini Oil Refineries Plants in Remote Oilfield Regions of Russia

The article considers with advantages of mini oil refinery plants over large ones in view of industrial security. The analyze is made proceeding from operation scales of mini and large oil refinery plants, industrial process automation level, objects interaction in production cycle. There is the characteristic of operation, general advantages of mini oil refinery plants and advantages for industrial security. Authors cover the issue from the following points of view: industrial automation, safety management system, occupational safety. As well authors deal with possibilities for the future development of mini oil refinery plants in regards to industrial security and its advantages over large ones.
The aim of the article is development possibilities of mini oil refinery plants in relation with safety. Theoretical part comprehends normative — legislative acts and standards of industrial safety, labor protection, and environmental safety at the oil and gas entities. Summing up the results, it can be concluded that the results of research shows advantages of mini oil refinery plants over large ones.
Keywords: industrial safety, fire protection, labor protection, environment safety, industrial automation, remote management, oil and gas industry, oil refinery plant, mini oil refinery plant

К СПИСКУ СТАТЕЙ